Product parameters

Adjustment time: 20-25 minutes

Drying time: 5-15 minutes

Drying time: 20-24 hours

Excellent water resistance and flammability

After drying, it has good resistance to weak acid, alkali and oil, and good solubility

Shear strength: 2.2 MPa (7 days) 3.0 MPa (14 days)

Product characteristics

♦ This product has strong adhesive force, especially suitable for large ceramic tile, quartz stone, slate indoor and outdoor wall paste, especially for high-rise external wall.

♦ Light steel frame system board, such as gypsum board, Aite board, plywood, etc. the base surface is pasted with indoor tiles.

♦ Tiles can be pasted on low water absorption base, such as on old tiles, and on firm paint surfaces.

♦ Flexibility, so that the adhesive layer can withstand the expansion and contraction due to the influence of temperature.

♦ It has excellent anti-seepage function.

♦ It is convenient to use and time-saving without soaking brick wet wall.

Product application

Firstly, the surface of the base course shall be cleaned. The base course shall be solid and flat, dry, clean, free from shaking, oil stain, wax grease, concrete curing agent, release agent and other loose materials.

According to the ratio of powder to water of 4:1, add water to the adhesive, stir while adding water, stir into paste, and let stand for 10 minutes, then stir again to use.

The prepared slurry is smeared and scraped on the base surface with a toothed trowel to make it evenly distributed in the form of stripes. The air is easy to be eliminated. The thickness of the coating is 3 mm-6 mm. The bonded material is kneaded on the coating, straightened and compacted, and no gap is left within 10 minutes. It can be adjusted arbitrarily.

After 24 hours, other construction can be carried out. It is recommended to use CCB color anti mildew joint sealer for better effect.