Product parameters

Binder: acrylic polymer

Additives: special functional additives, stabilizers, etc

Color: white

Toxicity: in water

Fire protection standard: grade 0, non combustible

Drying time: 12-24 hours

Color: a variety of standard colors for selection.

Product characteristics

♦ Strong plasticity, a variety of decorative effects.

♦ The construction is convenient and arbitrary.

♦ The coating is waterproof and alkali resistant.

♦ It can repair small defects on the wall.

♦ No bulging, no peeling.

Product application

1. Theoretical dosage: 0.6 – 1.2kg/m2 (depending on different base level)

2. Dilution: it can be diluted with about 5% water.

3. Construction method:

Mixing: if the coating is too thick, dilute it with water and mix it evenly.

Daubing: apply the slurry on the 1 ㎡ square working face with knife or roller, and use construction tools to make their favorite texture effect. In this way, from left to right, from top to bottom, the working face will be finished in order. At the same time of construction, the junction of each working face should be kept moist to prevent dry edge and interface. In order to ensure the continuity of texture, the working belt can be decorated with a small brush.

After modeling, when it is completely dry, paint a layer of your favorite latex paint color or brush dust-proof surface coating.

4. The moisture content of the base surface is ≤ 8%, the construction temperature is ≥ 5 ℃, and the air humidity is required to be less than 85%.