Product parameters

Binder: mineral powder, imported rubber powder, special additives.

Color: there are many colors to choose from

Time interval of secondary construction: 8-24 hours

Theoretical paint consumption: 0.6 ~ 1.2 m2 / kg / layer

Dilution: 4-5:1, add water and mix evenly.

Color: a variety of color choices.

Product characteristics

♦ Strong plasticity, a variety of decorative effects.

♦ The construction is convenient and arbitrary.

♦ After simple polishing, it can produce layered texture.

♦ It can repair small defects on the wall.

♦ No bulging, no peeling.

Product application

Base surface treatment: ensure that the base surface is clean, and there is no oil stain and foreign matter left. For the powdered or spalling wall, clean the dust and peeling part until the wall is firm, and fill and level the cracks or joints.

Modeling: batch the coating on the base surface irregularly with a spatula, drag out the desired effect figure with the cutter and press it to 1-3mm.

Polishing: after the coating surface is dry, polish it with a lint free cloth or stainless steel cutter.

Maintenance: two days after construction (air temperature > 25 ℃, humidity < 85%), spray water with wool roller once or twice, so as to make the effect more solid.

Overlay: roll coating or spraying mineral coating waterproof agent on the surface after maintenance to make it more firm.

The moisture content of the base surface is ≤ 8%, the construction temperature is ≥ 5 ℃, and the air humidity is required to be less than 85%.