Product parameters

Binder: pure acrylic acid

Solid content: 65%

Filler: finely graded dolomite

Additives: tackifier, toughener, etc

Color: white

Toxicity: none in water

Adhesion to concrete: 1.88n/m2

Fire protection standard: grade 0, non combustible, in line with European bs476part 1 standard

As binder and adhesive primer: about 2-3 kg / m2

The theoretical dosage of interface treatment agent for exterior wall renovation: About 0.3-0.4 kg / m2

Color: gray white

Product characteristics

♦ It has strong tolerance to base surface and is suitable for wet base surface.

♦ Adhesion, especially for smooth glaze. Loss caused by labor and material consumption.

♦ Excellent water resistance and impermeability.

♦ Good toughness, no cracking, tensile and compressive strength.

♦ Strong freeze-thaw resistance.

Product application

1. Mix the product, cement and water according to the ratio of 1:1:0.07, stir with high-speed motor until there is no residue of dry cement powder particles, and then mix it after standing for 5 minutes.

2. As a binder, the mixture is applied to the back of the foam board. The foam board is pressed quickly on the base surface. After 24 hours, the mixture is applied to the surface of the foam board with a trowel as a bonding leveling layer, and then coated with a layer of glass fiber net. The total coating thickness is 2 - 3 mm.

3. As an interface treatment agent, the slurry mixture is scraped on the surface of ceramic tile with a spatula, and then the subsequent coating can be applied after drying.

requirement: avoid contact between eyes and skin with wet materials for a long time.